Xbox One is the famous video game console that is used by the gaming society. This console is not only for playing games but also to stream movies and TV shows. Every console has the controller tool which helps to control the motions while playing games. Sometimes while playing games you may come across some difficulty with a joystick on your Xbox One Controller. So due to the difficulty, users think that how to take apart an Xbox One controller to solve the problem so that they can play games without any disturbance.
Similar post, How to Unblur an Image
Steps to take apart Xbox One Controller:
First, you have to arrange for the necessary tools like the T6T8T10 Screwdriver kit and Xbox One Controller. Having a tray while working is good as you can avoid screws or other smaller tools dropping on the floor which sometimes can miss. Follow the below-given steps to take apart the Xbox One Controller.
1- Remove the orange pry tool from the tool kit which helps to discard the handle covers of the controller.
2- Now, you should slide the pry tool connecting the plastic seam on the grips.
3- Hold the grip properly away from the central controller body. As you can get only sticky holding beneath the plastic, give a light force on it without destroying the internal parts.
4- Repeat the same thing for both the grips.
5- Now, you can remove the screws to take apart your Xbox Controller. Be cautious while removing it without destroying the wires as that has been connected between battery and circuit.
6- With the help of a T8 screwdriver take out the five security screws. Also, check whether you have an unscrewed the screw which is beyond the sticker in the battery housing.
You may like, Install My Wifi TV on Firestick
Steps to Take Apart Xbox One Controller:
Arrange the tools to take apart Xbox One Controllers such as Soldering Iron, fix it Opening tools, T6 Torx Screwdriver, T8Torx Screwdriver, and the controller. Follow the below-given steps to take apart the Xbox One Controller.
1- Using a pry tool take out the side panels.
2- Unscrew the 5 Torx Security Bit ( TR8 Screws)
3- Removing out the back panel, pry the panel following the 3.5 mm port.
4- Take out the ribbon carefully.
5- Screws on the controller motherboard by discarding the 2 Torx (T6) screws.
6- Separate the wires from the motherboard.
7- Discard the motherboard.
8- Take out the home button cover.
9- Now, take out the controller daughterboard by removing the 6 Torx (T6) screws
Steps to take apart Xbox One Controller Without Torx:
Removing your Xbox One Controller using a Torx screwdriver is an amazing choice but if you don’t have that at the time when you need it, you are supposed to follow the other alternative ways which are given in the following steps.
1- First, arrange for the necessary tools like 2mm turnscrew with an electronics level which has seven screws and one hidden screw.
2- Now, insert the screwdriver so that you can take out the screw easily. Remove all the screws only then you can take apart the Xbox One Controller.
Taking Xbox One Controller apart is lenient but what matters more is you have to be cautious while doing so. By following the above-given methods you can also clean the interior parts, clear the issues of your joystick, solve controller drift difficulty, and also you can paint. We hope this article will help you.
Also, search Browse Facebook on Roku